Product Description:
ZXQ-2automaticmetallographic sample inlaying machine(hereinafter referred to as the tessellation machine)is the latest product after XQ-2B. It is suitable for tiny metallographic sample(which is not shape and not easy to get.) to press the thermosetting plastics. After forming, it can be conveniently used for sample milling, and it is also helpful for microtissue determination under metallographic microscope.
Structural features:
The machine is a mechanical inlaying machine, with the motor, connecting the screw to drive the inner silk rod to make the lower mold of the clamping sample move up and down in the steel mold sleeve , and then the thermosetting plastics together with the inlaid samples are formed under heating conditions. The forming pressure in the sample preparation is automatically compensated by the springs fixed in the body, and the pressure of sample suppression can be indicated by the signal lamp.
This machine is equipped with intelligent digital display temperature controller, not only Set the time, set the temperature are displayed, the temperature sensor using thermocouple. The machine is equipped with intelligent digital display temperature controller, can set the time and set the temperature to display, the temperature sensor adopts thermocouple. In addition the machine has a high sensitivity, high accuracy, temperature display, easy to watch and easy to operate, etc. Each sample is inlaid (using the powder) for about 12 minutes.
working environment:
1、Altitude of not more than 1000 meters
2、The surrounding medium temperature is not higher than +40 ℃, and not less than -10 ℃
3、Air at a relative humidity of not more than 85% (at 20 ° C)
4、There is no conductive dust around, explosive gas，And can seriously damage the metal and insulation of corrosive gases
5、There was no obvious vibration or turbulence
Technical parameters:
ZXQ-2(Φ25mm) ZXQ-2(Φ30mm) ZXQ-2(Φ40mm)
1、specimen size：Φ25mm???????????? Φ30mm???????????? ??Φ40mm
2、Heater size：? 800W??????????????? 800W????????????????? 800W
3、Temperature range：0-300℃???????? 0-300℃??????????????? 0-300℃
4、Dimension：42*36*36cm????? 42*36*36cm42*36*36cm
5、Input voltage： 220V220V220V |
Customer Services
