|
ASTM美國材料實驗協會(American Society of Testing Materials )前身是國際材料試驗協會（International Association for Testing Materials, IATM）。19世紀80年代，為解決采購商與供貨商在購銷工業材料過程中產生的意見和分歧，有人提出建立技術委員會制度，由技術委員會組織各方面的代表參加技術座談會，討論解決有關材料規范、試驗程序等方面的爭議問題。ASTM是美國最老、最大的非盈利性的標準學術團體之一。經過一個世紀的發展，ASTM現有33669個（個人和團體）會員，其中有22396個主要委員會會員在其各個委員會中擔任技術專家工作。ASTM的技術委員會下共設有2004個技術分委員會。有105817個單位參加了ASTM標準的制定工作，主要任務是制定材料、產品、系統、和服務等領域的特性和性能標準，試驗方法和程序標準，促進有關知識的發展和推廣。下面是金屬疲勞與斷裂標準一覽：B645-02鋁合金的平面應變斷裂韌性試驗Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum AlloysB646-04鋁合金斷裂韌性試驗Standard Practice for Fracture Toughness Testing of Aluminum AlloysE6-03有關力學試驗方法的標準術語Standard Terminology Relating to Methods of Mechanical TestingE23-02a金屬材料切口試棒的沖擊試驗方法Standard Test Methods for Notched Bar Impact Testing of Metallic MaterialsE139-00e1金屬材料蠕度、蠕變斷裂和應力斷裂試驗Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic MaterialsE292-01材料斷裂時間的凹口張力試驗Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of MaterialsE328-02材料和結構件的應力松弛試驗Standard Test Methods for Stress Relaxation Tests for Materials and StructuresE338-03高強度薄板材料的銳切口張力試驗方法Standard Test Method of Sharp-Notch Tension Testing of High-Strength Sheet MaterialsE340-00e1金屬和合金宏觀腐蝕的測試方法Standard Test Method for Macroetching Metals and AlloysE399-05金屬材料水平變形斷裂強度的測試方法Standard Test Method for Plane-Strain Fracture Toughness of Metallic MaterialsE436-03鐵素體鋼的墜重破裂試驗方法Standard Test Method for Drop-Weight Tear Tests of Ferritic SteelsE466-96(2002)e1金屬材料上進行的恒定振幅軸向疲勞試驗Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic MaterialsE467-05軸向負載疲勞試驗機中恒振幅動態負載檢驗Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing SystemE468-90（2004）顯示金屬材料定幅疲勞試驗結果的方法Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic MaterialsE561-05R-曲線測定Standard Practice for R-Curve DeterminationE602-03圓柱形試樣的銳切口張力的試驗方法Standard Test Method for Sharp-Notch Tension Testing with Cylindrical SpecimensE604-83(2002)金屬材料的動態斷裂試驗方法Standard Test Method for Dynamic Tear Testing of Metallic MaterialsE606-92(2004)e1應變控制環疲勞試驗Standard Practice for Strain-Controlled Fatigue TestingE646-00金屬薄鋼板材料的拉伸應變硬化指數(n值)的測試方法Standard Test Method for Tensile Strain-Hardening Exponents (n-Values) of Metallic Sheet MaterialsE647-05疲勞裂縫增大率測量用測試方法Standard Test Method for Measurement of Fatigue Crack Growth RatesE739-91(2004)線性或線性化應力壽命(S-N)和應變壽命(e-N)疲勞數據的統計分析Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue DataE740-03用表面破裂張力試樣做斷裂試驗Standard Practice for Fracture Testing with Surface-Crack Tension SpecimensE812-91(1997)高強度金屬材料制慢彎預裂落擺沖擊試樣的破裂強度的測試方法Standard Test Method for Crack Strength of Slow-Bend Precracked Charpy Specimens of High-Strength Metallic MaterialsE813-91斷裂韌性JIC測定的標準試驗方法Standard Test Method For JIC,A Measure Of Fracture ToughnessE992使用等效能量法確定鋼的斷裂韌度的慣例Practice for Determination of Fracture Toughness ofSteels Using Equivalent Energy MethodologyE1049-85(1997)疲勞分析的周期計數Standard Practices for Cycle Counting in Fatigue AnalysisE1152Test Method for Determining J-R Curves3E1169-02耐久性試驗的實施Standard Guide for Conducting Ruggedness TestsE1221-96(2002)測定Kla鐵素體鋼的平面應變,斷裂抑制,破裂韌性的試驗方法Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic SteelsE1290-02測量裂縫尖端開口位移(CTOD)裂縫韌性的試驗方法Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness MeasurementE1304-97(2002)金屬材料平面應變(V型槽口)斷裂韌度的測試方法(代替SAE ARP 1704)Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic MaterialsE1457-00測量金屬蠕變開裂增長速度的試驗方法Standard Test Method for Measurement of Creep Crack Growth Rates in MetalsE1681-03恒定載荷下金屬材料環境促使裂紋的閾應力強度系數測定標準試驗方法Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic MaterialsE1737-1996斷裂韌性J積分的表征J-INTERGRAL CHARACTERIZATION OF FRACTURE TOUGHNESSE1820-01斷裂韌性測定的標準試驗方法Standard Test Method for Measurement of Fracture ToughnessE1823-96(2002)疲勞和裂紋試驗相關的標準術語Standard Terminology Relating to Fatigue and Fracture TestingE1921-05測定鐵素體鋼在轉變范圍內基準溫度的標準試驗方法Standard Test Method for Determination of Reference Temperature, To', for Ferritic Steels in the Transition RangeE1942-98(2004)周期性疲勞和斷裂力學試驗中采用的數據采集系統的評定標準導則Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics TestingE2207-02用薄壁管狀樣本進行張力控制軸向扭力疲勞試驗慣例Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular SpecimensE2368-04張力受控的熱機械疲勞測試慣例Standard Practice for Strain Controlledend
|
華東華南地區
